2011 Fall Services
Top of the Line Products We Offer
Autopilot Salt Generator
New! Salt Chlorine Generator Maintenance Guide
- Digital RC-35
- Note: 2010 Reference Pricing, 2011 Pricing Coming Soon
- Max pool gallons- 35,000
- Includes inline cell plumbing
- Includes proper amount of initial charge of salt
- Low 12v DC current
- Does NOT include electrical connections or control mounting
- MA sales tax NOT included
- Standard installation is included in price
- Pool Pilot Nano (For above ground pools)
- Max pool gallons - 22,000
- Digital control
- In line cell plumbing or with manifold
- Pool Pilot A/G (For above ground pools)
- Max pool gallons - 15,000
- Not Digital
- Low salt program, salt contains balancing chems.
- 3 cell options; in line, convection floater, plumbed into pool fitting
- Both Pool Pilot models include the following:
- Includes proper amount of initial charge salt
- Does NOT include electrical connections or control mounting
- MA sales tax is NOT included
- Standard installation is included in price
The functionality of a salt chlorine generator has a direct effect on the chemical balance and cleanliness of your swimming pool. Though salt chlorine generators are essentially maintenance free they do require a periodic cleaning of the salt generator cell. Calcium deposits build up on the cell's electrodes as a result of the electrolysis process generating the salt into chlorine. Therefore, your salt chlorine generator should be maintained at least every two seasons and pools that have experienced chemical imbalance or an above average bather load would benefit from a yearly service.
Please download, or view and print, the maintenance form:
2011 Salt Chlorine Generator Maintenance PDF
A salt chlorine generator service includes the following:
- Clean out the in line strainer of excess debris and silt
- Remove and soak the cell in an acid bath to remove scale buildup. (This may take a couple of days depending on severity of buildup.)
- Addition of a scale inhibitor to pool water.
- Recalibrate unit and ensure all is operating properly.
Fall Clean Up Contract
Fall Pool Clean Up:
This service is typically needed in the spring, once the pool cover is removed and the pool is open and running with shock and algaecide. It may take multiple visits depending on severity of pool water quality and debris content. In severe cases we are able to visit the pool prior to a contracted start and give a professional opinion on how long it may take. Once started a water sample will be brought back to the store for analysis. The balancing chemicals will need to be purchased separately and we will add them to the pool. Also included in this service is vacuuming of the pool, cleaning of the skimmer and pump baskets, backwashing filter and replenishing DE if necessary. This process gets the pool ready for regular In-Season Cleaning Service. Once pool is cleaned and balanced, you will be scheduled and charged for weekly/bi-weekly cleanings.
Note: We strongly recommend that Cartridge and De Filters be professionally cleaned by Snyder Pools at least once a season. We will remove element/grids, soak them, inspect interior parts and deliver them back and re-install them in your filter. Please contact the pool store for more information.
ALL PDF Form Downloads
Please download, or view and print, the appropriate forms:
2011 Salt Chlorine Generator Maintenance PDF
2011 Fall Package Specials !! PDF
2011 Cartridge Cleaning (Only) PDF
2011 Fall Pool Cleaning
Fall Pool Clean Up:
This service is typically needed in the spring, once the pool cover is removed and the pool is open and running with shock and algaecide. It may take multiple visits depending on severity of pool water quality and debris content. In severe cases we are able to visit the pool prior to a contracted start and give a professional opinion on how long it may take. Once started a water sample will be brought back to the store for analysis. The balancing chemicals will need to be purchased separately and we will add them to the pool. Also included in this service is vacuuming of the pool, cleaning of the skimmer and pump baskets, backwashing filter and replenishing DE if necessary. This process gets the pool ready for regular In-Season Cleaning Service. Once pool is cleaned and balanced, you will be scheduled and charged for weekly/bi-weekly cleanings.
2011 Fall Package Specials !!
Now offering Package Specials for all services offered this Fall. See the PDF links below or call the office for more information!
2011 Fall Package Specials !! PDF
2011 Salt Chlorine Generator Maintenance PDF
Cartridge/Element
Cleaning Service
Over time oil and dirt builds up in your Cartridge or DE filter and as the element clogs it reduces flow to your pool. A simple hosing off does not thoroughly remove the debris that is embedded in the mesh. Snyder Pools recommends all elements and cartridges be professionally cleaned at least once a season.
Cartridge cleaning includes a thorough wash and soak in our special acid cleaner here at our store. We will perform a diagnostic check of all interior parts assuring an easier pool run.
Please Note: Heavily soiled cartridges may take more than one soak to accurately clean which could take up to 72 hours. We sometimes have backup elements that you can run with but they may not be available at times.
Please download, or view and print, the cartridge/element forms:
2011 Cartridge Cleaning (Only) PDF Order Form
Top of the Line Products We Offer
Autopilot Salt Generator
Heaters
Please call for pricing
Heaters
Hayward H-Series Gas Heaters
H-100 Aboveground Gas Heater
H-300 Gas Heater
H-350 Gas Heater
H-400 Gas Heater
StaRite Induced Draft Gas Heaters
Max E Therm SR 333
Heat Pumps
Aqua Cal Aero Temp
AT 100 90,000 Btu up to 18’ x 36’
AT 120 109,000 Btu up to 20’ x 40’
AT 155 124,000 Btu over 20’ x 40’
Tropical Heat Pump (Above Ground)
T-30 110V 30,000 Btu 12’-18’
T-55 220V 55,000 Btu 18’-24’
T-75 220V 75,000 Btu 27’-18’X33’
Liner Replacements
Price includes:
- Rovel or 4', 6', 8' Stair
Rectangle – Grecian – Oval: Starting at $3500.00 Installed
16x32
18x36
20x40
Tru-El & Lazy-El: Starting at $3950.00 Installed
16x24x42
20x28x40
Freeform Pools will be quoted after inspection
- Tax included on installed liner.
- All other sizes and shapes will be quoted after site inspection.
- Liner patterns Pacific 20 mil or 27/20
- All 27 mil additional charge
Pacific Safety Covers
Please call for quote
Performance Safety Cover: Starting at $1625.00 Installed
16 x 32 Rectangle Only
18 x 36 Rectangle Only
20 x 40 Rectangle Only
- Price will include labor to install and sales tax.
- Green Mesh
- Standard Anchors
- 15 Year Warranty
- No stair deduction
- Brick deck is extra for anchors in pipe systems
- Free form or special orders are quoted after inspection
- Swim-outs and sun ledges are available, sold seperately
- Rock features, water features, cutouts etc. will be quoted separately
- Solid covers are available, sold seperately and are not recommended due to the amount of snow load.
- Brass anchor collars are strongly suggested for aggregate decks at an extra cost per pool to “hide” chipping that is common with exposed aggregate decks.
- Prices for Pacific Showcase covers (for most freeform pools) come with the 20 year warranty.
Aboveground Pool Liners
Please call for cost
All Beaded/J Bead- Stonecrest/Blue Speckle or Stone Braid/Prism
15’ 18’ 21’ 24’
27’ 12’x23’ 15’x24’ 15’x25’
15’x30’ 16’x32’ 18’x33’
Upgrade to Heave Gauge Diamond Wave/Prism will be a 20% increase in cost.
Overlap Type-Blue solid wall/Blue Print Floor
15’ 18’ 21’ 24’
27’ 12’x23’ 15’x25’ 15’x30’
16’x32’ 18’x33’
Niagara/Prism is more than price listed above per size.
- Liners are warranted by their manufacturer per program.
- Liners are 48” and 52”- must specify with beaded and J Bead liners.
- Rectangle, irregular or hopper styles must be quoted and special ordered.
Filter Packages
Please call for cost
Aboveground Filters: Starting at $645.00
Filter systems come complete with cord, valve, clamps, union connectors, and hoses.
Starite 19” Cristal-Flo System with 1 Hp Pump
Starite 22” Cristal-Flo Sand System with 1.5 Hp Pump
Hayward 16” S166T Sand Filter with 1 Hp Pump
Hayward 18” S180T Sand Filter with 1 Hp Pump
Inground Sand Filters: Starting at $875.00
Top Mount Filters
Hayward 20” S210T Sand Filter with 1 Hp Super Pump
Hayward 22” S220T Sand Filter with 1 Hp Super Pump
Hayward 24” S244T Sand Filter with 1 Hp Super Pump
Side Mount Filters: Starting at $1130.00
Hayward 20” S210S Sand Filter with 1 Hp Super Pump
Hayward 24” S210S Sand Filter with 1 Hp Super Pump
Inground Cartridge Filters: Starting at $1240.00
Starite S7M120 300 sq. ft. Media Filter with 1 Hp Pump
Starite Media Filter only
Starite Dyna Glas Self Priming Pump, 1 Hp
|
